Honeycomb Metal Decorative Mesh Heavy Duty Plate To Foot Pedal

Honeycomb Heavy Duty Metal Plate Foot Pedal Metal Decorative Mesh

1. Product Introduction

The rhombus net is made by crocheting, and its processing and manufacturing process is relatively simple. Moreover, the diamond-shaped net is a kind of mesh with relatively uniform meshes and a fairly flat surface, and the first impression of the diamond-shaped net is that it is beautiful and generous.

2. Parameter table

3. Product application

  It conforms to the specifications of fixed platforms, walkways and stairs stipulated by British Standards. It is the most ideal product in occasions with small spans. It is no exception even under the load of transportation equipment aisles. It can also be used as warehouse racks, Panels of pavilions, trestle bridges, protective fences, sun curtains, etc.

4. Product advantages

   Good manufacturability; the aluminum plate punching net can be processed into various complex geometric shapes such as plane, arc and spherical surface by adopting the process of processing first and then spraying paint.

5. Production process

  Punching, leveling and cutting processes will lead to the incompleteness of the plate surface, but these incompleteness are acceptable in general industrial products. If you have special requirements, we will take additional measures such as powder spraying or painting, electro galvanizing, hot galvanizing, anodizing and so on.

6. Installation method

When installing the punching net enclosure, it should be installed directly with screws through the installation holes. Therefore, in the early stage, it is necessary to mark relevant installation holes around the punching net, so as to ensure that it becomes much simpler when fixing in the later stage, and only need to be fixed directly.

7. Matters Needing Attention

 First of all, the net in the washing must not use acidic or alkaline cleaning agent to clean, to clean metal cleaning agent.

8. Packing method

 In order to prevent the problems of drop, friction and scratch in the process of placing the stainless steel punching plate, the following points should be paid attention to when transporting and packing the stainless steel punching plate: the lower part of the packing of the stainless steel punching plate (also called the steel grating plate) is padded with wooden square, for easy loading and unloading of forklift trucks, the stainless steel piercing plate for export must be fastened with twisted square steel and fasteners. Because the square steel has the risk of spreading insect diseases, it must abide by the laws and regulations of the destination country. Channel Steel or plywood can be used instead of square steel, both the supplier and the demander agree that the bottom of the package should be used as the lifting position instead of the twisted square steel or flat steel of the stainless steel punching plate.