Non Dry Crack And Vibration Resistant 100:25 Pu Plastic Injection Air Filter Adhesive

Non Dry Crack And Vibration Resistant 100:25pu Plastic Injection Air Filter Adhesive

1. Product introduction

It is an elastomer. The filter element end cover is formed by machine pouring, which saves the iron end cover and rubber sealing ring of the air filter element and saves the manufacturing cost. Moreover, it is durable and has good sealing performance.
And it is the most ideal product for the production of pull air filter element.

2. Parameter table

3. usage method

⒈ before each glue injection into the glue injection machine, the a glue barrel (generally 200kg / barrel) must be fully rolled until the a glue is mixed evenly.
2. The ratio of AB glue is a: B = 100:25 (i.e. 4:1).
3. The material temperature should be controlled at 24 ° c-28 ° C, and the machine can be started for operation
4. The mold must be wiped with release agent before use (Note: the new plastic mold can be wiped free)
5. If the reaction of materials a and B is insufficient, measure the proportion of materials a and B.
⒍ materials a and B must be sealed and stored. So as not to react with air and water vapor and affect the use effect of colloid.