Fingerprint Resistant Filter End Cover Waterproof Material filter element

Fingerprint resistant filter end cover  waterproof material filter element

1. Product Description

The filter element end cover mainly plays the role of sealing both ends of the filter material and supporting the filter material. It is mainly stamped into various shapes with steel plate according to the needs. The filter element is installed on the vehicle and engine. During the mechanical operation, vibration will occur, and the air filter will bear it. The end cap can effectively improve the bearing capacity of the filter material under great stress. Generally, the end cap is stamped into a groove for placing the end surface of the filter material and the adhesive on the other side, and the rubber seal is bonded on the other side to seal the filter. The role of the material and the sealing filter element channel, the end cover material is steel plate, plastic, foamed polyurethane Among them, the foamed polyurethane can be directly heat-sealed with the filter material by a mold, thereby saving adhesive and sealing strips.

2. Specifications

There are parts of specifications of filter caps we made for clients before for your reference. If you need other shapes, we could make customization.

3. Packing method

The filter end cover has a layer of protective film, which can achieve good end cover protection function. Especially in the process of transportation, the bottle caps shall be packed one by one to prevent the bottle caps from being scratched. The end cover shall be packed with braided tape. Put the packed end cover into the plastic bag, and finally use high-quality wooden cases for packaging, which is fast in transportation and convenient for forklift loading and unloading.

4. FAQ

The filter end cover already has a protective film, which can achieve a good end cover protection function. Especially during transportation, the caps should be packed one by one to prevent the caps from being scratched. The end caps are packaged and bundled with a braid. Put the packaged end caps into plastic bags, and finally pack them in high-quality wooden boxes, which are fast and easy to load and unload with forklifts.

1.Certificates:

RoHs,UL,SGS,MSDS,DIN53438

2.Payment terms:

50% deposit upon getting the order,balance against the B/L copy.

3.Delivery date:

About 7 working days(≤500pcs), special order is negotiable to be quicker.

4.Sample Terms:

We can supply 1-2 small samples for tree but express cost is covered by your side.

5.Minimum Order Quantity:

No strict principle for standard sizes,but 50pcs for non-standard dimensions or types.

6.Price Terms:

EX-WORKS, FOB, CNF, CIF OR DDU is available and up to you.

7.Lead time:

3 Days for a 40ft container, weeks for two 40ft container.

5. matters needing attention

The material selection of the end cover should be consistent with the connection mode of the equipment, otherwise it can not be used normally if the equipment does not match.