05 / 08 Thick Special Round End Cover Fingerprint Resistant Filter Cover

05 / 08 thick special round end cover fingerprint resistant filter cover

1. Product Description

  The end cover of the filter element mainly plays the role of sealing both ends of the filter material and supporting the filter material. The steel plate is mainly pressed into various shapes as required. The filter element is installed on the vehicle and engine, which will produce vibration during mechanical operation, and the air filter will bear great stress. The end cover can effectively improve the bearing capacity of the filter material, Generally, one side of the end cover is stamped into a groove that can place the end face of the filter material and the adhesive, and the other side is bonded with a rubber seal to seal the filter material and the channel of the filter element.

2. Specifications

  There are parts of specifications of filter caps we made for clients before for your reference. If you need other shapes, we could make customization.

3. Packing method

The filter cover already has a protective film to achieve good end cover protection. In particular, in the transport process, to the bottle cap one by one packaging, to prevent bottle cap scratches. The end cover is packed and bundled with braided tape. Put the end cover into the plastic bag, and finally use high-quality wooden box packaging, transport fast, easy to load and unload forklift.

4. FAQ

  The filter end cover already has a protective film, which can achieve a good end cover protection function. Especially during transportation, the caps should be packed one by one to prevent the caps from being scratched. The end caps are packaged and bundled with a braid. Put the packaged end caps into plastic bags, and finally pack them in high-quality wooden boxes, which are fast and easy to load and unload with forklifts.

1.Certificates:

RoHs,UL,SGS,MSDS,DIN53438

2.Payment terms:

50% deposit upon getting the order,balance against the B/L copy.

3.Delivery date:

About 7 working days(≤500pcs), special order is negotiable to be quicker.

4.Sample Terms:

We can supply 1-2 small samples for tree but express cost is covered by your side.

5.Minimum Order Quantity:

No strict principle for standard sizes,but 50pcs for non-standard dimensions or types.

6.Price Terms:

EX-WORKS, FOB, CNF, CIF OR DDU is available and up to you.

7.Lead time:

3 Days for a 40ft container, weeks for two 40ft container.

5. matters needing attention

  The material selection of the end cover should be consistent with the connection method of the device, otherwise it cannot be used normally if it does not match the device. End covers of different materials are used in different temperature environments.