Special 9059-33-08 Filter End Caps Thickness 1mm

Special End Cap For High Temperature Resistant Corrosion Resistant Waterproof Filter

1. Product Description

  The end cap of the filter element mainly plays the role of sealing the two ends of the filter element and supporting the filter element. The filter element is pressed into various shapes according to the needs of the steel plate. The filter element is installed on the vehicle and the engine. During the mechanical operation, it will produce vibration, the end cap can effectively improve the bearing capacity of the filter material. One side of the end cap is pressed into a groove which can be used to place the end of the filter material and the adhesive. The other side is bonded with a rubber seal, the utility model has the function of sealing filter material and sealing filter element channel.

2. Specifications

  There are parts of specifications of filter caps we made for clients before for your reference. If you need other shapes, we could make customization.

3. Packing method

  The filter end cover already has a protective film, which can achieve a good end cover protection function. Especially during transportation, the caps should be packed one by one to prevent the caps from being scratched. The end caps are packaged and bundled with a braid. Put the packaged end caps into plastic bags, and finally pack them in high-quality wooden boxes, which are fast and easy to load and unload with forklifts.

4. FAQ

  The filter end cover already has a protective film, which can achieve a good end cover protection function. Especially during transportation, the caps should be packed one by one to prevent the caps from being scratched. The end caps are packaged and bundled with a braid. Put the packaged end caps into plastic bags, and finally pack them in high-quality wooden boxes, which are fast and easy to load and unload with forklifts.

1.Certificates:

RoHs,UL,SGS,MSDS,DIN53438

2.Payment terms:

50% deposit upon getting the order,balance against the B/L copy.

3.Delivery date:

About 7 working days(≤500pcs), special order is negotiable to be quicker.

4.Sample Terms:

We can supply 1-2 small samples for tree but express cost is covered by your side.

5.Minimum Order Quantity:

No strict principle for standard sizes,but 50pcs for non-standard dimensions or types.

6.Price Terms:

EX-WORKS, FOB, CNF, CIF OR DDU is available and up to you.

7.Lead time:

3 Days for a 40ft container, weeks for two 40ft container.

5. matters needing attention

  The material selection of the end cover shall be consistent with the connection mode of the equipment, otherwise it cannot be used normally if it does not match the equipment. End covers of different materials shall be used in different temperature environments.