Yellow Polypropylene Polyurethane Mold for Air Filter Element

Yellow Polypropylene Polyurethane Mold Air Filter Material Is Used To Make Air Filter Element

1. Product introduction

 It is inevitable to make Pu mould for filter element. The high-quality Pu mold can be reused up to 80 times, greatly reducing the cost of the filter. Pu mould is made of plastic PP material.

 2. Parameter table

4. Product principle

Automobile air intake is as important as human breathing, and the air filter element is a very important filter in this link.

The filter elements of various vehicles are different, but their functions are completely the same. They are all filtration. The engine needs gas to ignite, and the gas first enters the intake pipe from outside the car, then passes through the air flow sensor, then passes through the throttle, and finally enters the engine for combustion

However, the air filter element is particularly important. Some large dust particles or paper scraps outside the car need to be filtered by the air filter element. The air flow sensor is responsible for the regulation of sending air into the next link. The throttle is to control the intake flow, and the accelerator pedal is directly controlled. Finally, a mixture of air and gasoline is synthesized for combustion in the engine.