K2845 Heavy Duty Air Filter Not Easy Deform Saves Fuel And Fully Intake

K2845 Is Not Easy To Deform, Saves Fuel And Fully Intake Air Heavy Duty Air Filter

1. Product introduction

The compressed air flows into the deflector from the inlet, and the helical teeth similar to the fan blades are evenly distributed on the deflector. These helical teeth can force the high-speed flowing compressed air to rotate violently along the tangential direction of the helical teeth. The water vapor, oil droplets and larger solid impurities in the air are separated, thrown onto the inner wall of the water cup, and finally flow to the bottom of the water cup. The remaining compressed air is further filtered through the filter element, and the tiny solid impurities in it are removed, and finally the clean compressed air flows out from the outlet.The air filter is an important part of the engine. Whether the matching of the air filter is reasonable or not directly affects the power and economy of the engine. The quality of the air filter, especially the quality of the filter element, is one of the main reasons that affect the early wear of the engine. In order to ensure the reliable operation of the engine and avoid early wear, users are kindly requested to be familiar with and abide by the provisions of this manual.

2. Parameter table

3. Product principle

The air enters the cyclone tube coarse filter through the rain cap, and extracts most of the larger dust through the ejection tube. The coarse filtration efficiency can reach more than 90%. The smaller dust enters the fine filter and passes through the main filter. The filter element is filtered, and the clean air enters the supercharger through the air outlet and the connecting pipe. The air filter with this structure has a total rejection rate >99.5%

4. Method of operation

During installation, the upper and lower connection points must be closely attached, which can also ensure the safety of the operator. As mentioned earlier, its main function is to remove dust, so no matter what connection method is used, one word must be guaranteed: Airtight.

When maintaining a dry air filter, you should take the filter element up and blow out with compressed air from the filter element, while rotating the filter element, while the blowing tube moves along the direction of the filter paper crease to completely blow off the dust accumulated in the filter element.

5. Matters Needing Attention

The service life of filter element shall not be evaluated by observation, but based on resistance. A dirty filter element may still have a long service life, and carbon pollutants may be invisible to the eyes. The best way is to replace the filter element according to the instructions of the differential pressure indicator. If the differential pressure indicator is damaged, it needs to be replaced with a new indicator.

6.FAQ

1.Certificates:

RoHs,UL,SGS,MSDS,DIN53438

2.Payment terms:

50% deposit upon getting the order,balance against the B/L copy.

3.Delivery date:

About 7 working days(≤500pcs), special order is negotiable to be quicker.

4.Sample Terms:

We can supply 1-2 small samples for tree but express cost is covered by your side.

5.Minimum Order Quantity:

No strict principle for standard sizes,but 50pcs for non-standard dimensions or types.

6.Price Terms:

EX-WORKS, FOB, CNF, CIF OR DDU is available and up to you.

7.Lead time:

3 Days for a 40ft container, weeks for two 40ft container.